Skip to content
become a verified vendor

Coverage

Precast Industries — Everything Precast
PCINPCAACPAASTMBIBMFIBCPCIWPCAIPHAAASHTOPCINPCAACPAASTMBIBMFIBCPCIWPCAIPHAAASHTOPCINPCAACPAASTMBIBMFIBCPCIWPCAIPHAAASHTOPCINPCAACPAASTMBIBMFIBCPCIWPCAIPHAAASHTO

Everything Precast in the Palm of your hand and push of your finger..........

NewLive auctions & certified inspections

The global platform foreverything precast.

Source precast products, plants and machinery, engineering data and materials from verified manufacturers in 35 countries — with the drawings, standards and inspection reports attached to every listing.

Every vendor verified · Every auction lot inspected

Verified vendors
180+Verified vendors
Live listings
1,200+Live listings
Countries served
35Countries served
Platform uptime
98.4%Platform uptime
The Precast Industries catalogue on a desktop browser
The same catalogue on a phone
Live plant network
Updated now
54,201Units today
94.5%Efficiency
312In transit

Box culvert 2400×1800

Rotterdam Yard 2

Pouring

Manhole riser Ø1200

Ohio Plant 04

Curing

Hollowcore 200 mm

Texas Line A

Shipped
Follow production from pour to deliveryTrack →
Stacks of hollowcore floor slabs inside a precast production hall under a gantry crane

Inside the plants

Cast under cover, cured to a schedule.

Hollowcore, panels and beams come off a controlled line — the same bed, the same mix, the same curing regime, run after run.

What we do

One platform, six avenues into the precast industry.

Products, machinery, engineering, materials, auctions and knowledge — the whole precast value chain in a single, searchable ecosystem instead of a hundred disconnected phone calls.

Volumes 01 — 10000

Series Precast_2026// SPECS

Top sellersFull catalogue
Cast trench section sitting in the opened mould before lifting
Vol. 02

Catch Basin

HeavyDuty$450.00
Trench mould with side panels released, exposing the cast unit
Vol. 03

Circular Slab

HeavyDuty$450.00
Trench mould with side panels released, exposing the cast unit
Vol. 04

Curb Stop

HeavyDuty$450.00
Interlocking trench mould with the cavity open, mounted on its stand frame
Vol. 05

Drywell

HeavyDuty$450.00
Trench mould closed with the lid plate fitted, ready for pouring
Vol. 06

Footing

HeavyDuty$450.00
Trench mould with side panels released, exposing the cast unit
Vol. 07

Grease Trap

HeavyDuty$450.00
Trench mould closed with the lid plate fitted, ready for pouring
Vol. 08

Storm Ring

HeavyDuty$450.00
Trench mould with side panels released, exposing the cast unit
Vol. 09

Low Dome

HeavyDuty$450.00
Interlocking trench mould with the cavity open, mounted on its stand frame
Vol. 10

Sanitary Ring

HeavyDuty$450.00
Finished interlocking trench unit lifted clear, showing the socket end
Vol. 11

High Collars

HeavyDuty$450.00
Cast trench section sitting in the opened mould before lifting
Vol. 12

High Dome

HeavyDuty$450.00
Finished interlocking trench unit lifted clear, showing the socket end
Vol. 13

Solid Ring

HeavyDuty$450.00
How it works

From search to signed PO — without leaving the platform.

Book a walkthrough
  1. 01

    Search the ecosystem

    Filter 1,200+ live listings by product family, standard, load class, region and lead time — or start from a drawing.

  2. 02

    Compare verified vendors

    Every vendor is audited before listing. See certifications, plant capability, past supply record and inspection reports side by side.

  3. 03

    Request quotes & documents

    Send one structured RFQ to multiple plants. Drawings, calculations and compliance docs come back attached, not scattered.

  4. 04

    Transact with confidence

    Certified inspection, fair-market appraisal and secure documentation workflows run inside the platform, from PO to delivery.

Precast standards & specification

Box culvert · headwall & wingwallsASTM C1577
Precast box culvert section with a headwall and flared wingwalls
Live loadHS20-44
Fill height0.6–8 m
Wall200 mm
Engineering & standards

Engineering knowledge from actual project execution.

Not textbook theory — the drawings, calculations and methods that plants and site crews used to deliver real structures, published with the standards they were designed against.

  1. 01

    Drawings & Details

    Shop drawings, CAD details and connection typicals from executed projects.

  2. 02

    Design Concepts

    Structural schemes, span tables and system selection guidance.

  3. 03

    Calculations & Standards

    Load calculations mapped to ASTM, EN, IS and DOT references.

  4. 04

    Installation Methods

    Lifting, placement, bracing and grouting sequences that work on site.

  5. 05

    Production & Handling

    Casting cycles, demoulding, curing regimes and yard handling practice.

Free to access — no email wall on technical data

Standards & compliance

Filter by the code, not by guesswork.

Every listing carries the standards it was designed against. Search by ASTM, EN, IS or a state DOT reference and see only what actually complies.

Where a manufacturer supplies documentation, regional DOT and municipal standards are mapped too — so an approval that took three emails now takes one filter.

North America

  • ASTM C478
  • ASTM C1577
  • ASTM C913
  • AASHTO M199
  • ACI 318
  • PCI MNL-116

Europe

  • EN 1917
  • EN 14844
  • EN 13369
  • EN 15258
  • EN 1168
  • Eurocode 2

Bridges & Highways

  • AASHTO LRFD
  • AASHTO M259
  • AASHTO M273
  • PCI MNL-116
  • PCI MNL-135
  • ACI 318

DOT & Municipal

  • NYCDOT
  • PennDOT
  • Caltrans
  • TxDOT
  • MassDOT
  • NJDOT

Specified to state standards

Alabama DOTAlaska DOT&PFArizona DOTArkansas DOTCaltransColorado DOTConnecticut DOTDelDOTFlorida DOTGeorgia DOTHawaii DOTIdaho TransportationIllinois DOTIndiana DOTIowa DOTKansas DOTKentucky TransportationLouisiana DOTDMaine DOTMaryland DOTMassDOTMichigan DOTMnDOTMississippi DOTMissouri DOTMontana DOTNebraska DOTNevada DOTNew Hampshire DOTNew Jersey DOTNew Mexico DOTNew York State DOTNCDOTNorth Dakota DOTOhio DOTOklahoma DOTOregon DOTPennDOTRhode Island DOTSCDOTSouth Dakota DOTTennessee DOTTxDOTUtah DOTVermont AOTVirginia DOTWSDOTWest Virginia DOTWisconsin DOTWYDOTAlabama DOTAlaska DOT&PFArizona DOTArkansas DOTCaltransColorado DOTConnecticut DOTDelDOTFlorida DOTGeorgia DOTHawaii DOTIdaho TransportationIllinois DOTIndiana DOTIowa DOTKansas DOTKentucky TransportationLouisiana DOTDMaine DOTMaryland DOTMassDOTMichigan DOTMnDOTMississippi DOTMissouri DOTMontana DOTNebraska DOTNevada DOTNew Hampshire DOTNew Jersey DOTNew Mexico DOTNew York State DOTNCDOTNorth Dakota DOTOhio DOTOklahoma DOTOregon DOTPennDOTRhode Island DOTSCDOTSouth Dakota DOTTennessee DOTTxDOTUtah DOTVermont AOTVirginia DOTWSDOTWest Virginia DOTWisconsin DOTWYDOT
Alabama DOTAlaska DOT&PFArizona DOTArkansas DOTCaltransColorado DOTConnecticut DOTDelDOTFlorida DOTGeorgia DOTHawaii DOTIdaho TransportationIllinois DOTIndiana DOTIowa DOTKansas DOTKentucky TransportationLouisiana DOTDMaine DOTMaryland DOTMassDOTMichigan DOTMnDOTMississippi DOTMissouri DOTMontana DOTNebraska DOTNevada DOTNew Hampshire DOTNew Jersey DOTNew Mexico DOTNew York State DOTNCDOTNorth Dakota DOTOhio DOTOklahoma DOTOregon DOTPennDOTRhode Island DOTSCDOTSouth Dakota DOTTennessee DOTTxDOTUtah DOTVermont AOTVirginia DOTWSDOTWest Virginia DOTWisconsin DOTWYDOTAlabama DOTAlaska DOT&PFArizona DOTArkansas DOTCaltransColorado DOTConnecticut DOTDelDOTFlorida DOTGeorgia DOTHawaii DOTIdaho TransportationIllinois DOTIndiana DOTIowa DOTKansas DOTKentucky TransportationLouisiana DOTDMaine DOTMaryland DOTMassDOTMichigan DOTMnDOTMississippi DOTMissouri DOTMontana DOTNebraska DOTNevada DOTNew Hampshire DOTNew Jersey DOTNew Mexico DOTNew York State DOTNCDOTNorth Dakota DOTOhio DOTOklahoma DOTOregon DOTPennDOTRhode Island DOTSCDOTSouth Dakota DOTTennessee DOTTxDOTUtah DOTVermont AOTVirginia DOTWSDOTWest Virginia DOTWisconsin DOTWYDOT
Manufacturing network

Follow your product being born — live.

Connected plants publish production status to the platform, so a pour starting, a cure finishing and a load leaving the yard show up against the order instead of needing a phone call. Rolling out with plants joining the network.

Request network access
Factories online
0
Platform uptime
0
Overall efficiency
0+2.4%
Active shipments
0

Daily production

Sample view
  • Steel Castings0 / 1,500
  • Iron Forgings0 / 900
  • Precast Rings0 / 1,250
Grid load

0% MW

Optimal range

Live factory network

Example plants
  • Box culvert 2400×1800

    Rotterdam Yard 2

    Pouring
  • Manhole riser Ø1200

    Ohio Plant 04

    Curing
  • Hollowcore 200 mm

    Texas Line A

    Shipped
  • Septic tank 3000 gal

    San Juan Plant 01

    Demoulding
Catch BasinCircular SlabCurb StopDrywellFootingGrease TrapStorm RingLow DomeSanitary RingHigh CollarsHigh DomeSolid Ring
Platform capabilities

The parts of a precast job that were never really software.

Quoting, approving, sequencing and record-keeping have run on email and spreadsheets for decades. These are the pieces that replace them.

01

Structured RFQs

One enquiry reaches every shortlisted plant with the same drawings, tolerances and delivery window attached — so the quotes come back comparable.

02

Vendor scorecards

Certifications, plant capability, past supply record and inspection history on one card, updated as each job closes.

03

Document threads

Every drawing revision, approval and mill certificate stays on the thread it belongs to, with an audit trail that survives staff turnover.

04

Delivery sequencing

Match a plant's casting cycle to the site programme so elements arrive in installation order instead of by truckload.

05

Standards mapping

Products carry the codes they were designed against, so a specifier can filter by standard instead of by guesswork.

06

Lifecycle records

What was installed, by whom, against which drawing — retrievable for the life of the asset, not just the life of the contract.

0
Live listings

Equipment, inventory and services

0
Verified vendors

Audited before a listing goes live

0
Countries

Across four continents

0
Units streamed

Production tracked live today

0
Documents

Drawings, specs and certificates

0
Plant efficiency

Average across connected lines

Mould walkthroughs

Watch the mould before you specify it.

Walkthroughs of the moulds themselves — how each one opens, how the cast unit comes clear, and the end profile that lets sections run together.

4 ft leaching galley — mould walkthrough
Mould walkthroughWatch

4 ft leaching galley — mould walkthrough

The galley mould opening, the cast unit lifting clear, and the interlocking end profile that lets sections run together.

Leaching galley

Built to run in series.

Galley moulds cast a chamber with an open end, so sections key into one another and a run extends to whatever length the drainage field needs.

30–48 catch basin mould
Mould walkthrough0:22

30–48 catch basin mould

A rectangle-cutout catch basin mould opening on its stand frame, with the cast unit exposed as the side panels swing clear.

3 ft leaching galley mould
Mould walkthrough0:14

3 ft leaching galley mould

The 3 ft galley mould through its release sequence, showing the arch profile and the open end the next section keys into.

Ring mould
Mould walkthrough0:14

Ring mould

A manhole ring mould opening on its cradle, with the stepped joint that seats the next ring above it.

Square block mould
Mould walkthrough0:26

Square block mould

A small square block mould through its full cycle — panels releasing, the cast unit clearing, and the mould closing again.

Open the video library
From Precastipedia

The vocabulary of the casting floor.

Precast has its own language, and most of it was never written down for people entering the industry. Precastipedia is the attempt to fix that.

Open Precastipedia
Hollowcore
Prestressed floor slab with longitudinal voids that cut weight without losing span.
Demoulding
Releasing a cured element from its form — the point where cycle time is won or lost.
Haunch
The thickened corner between a culvert's wall and slab, where shear is highest.
Grade ring
A shallow ring stacked under a cover to bring a structure up to finished road level.
Prestressing
Tensioning strand before the pour so the element resists tension once released.
Self-consolidating
A mix fluid enough to fill congested reinforcement without vibration.
Wet cast
Higher-slump concrete cast in a form and left to cure before stripping.
Dry cast
Zero-slump concrete compacted and stripped immediately, used for pipe and rings.
Who it's for

Built for every role in the precast value chain.

Manufacturers, engineers, contractors and asset owners work from the same record — so the drawing a plant poured from is the drawing the inspector signs off.

Precast Manufacturers

List surplus capacity, move idle equipment and reach buyers in 35 countries without a sales trip.

  • Sell idle assets
  • Win specification
  • Expand distribution

Engineers & Specifiers

Pull drawings, load tables and standards straight into your documents — no gated downloads, no email walls.

  • CAD & BIM files
  • Verified load data
  • Code compliance

Contractors & Buyers

Compare verified vendors on lead time, price and certification, then request quotes from one dashboard.

  • Faster sourcing
  • Vetted suppliers
  • One quote inbox

Infrastructure Owners

Trace what was installed, by whom, and against which standard — for the life of the asset.

  • Full traceability
  • Standards audit
  • Lifecycle records
Trust & verification

Nobody buys a batching plant on a promise.

Precast is heavy, expensive and permanent. Every vendor, listing and auction lot on the platform carries the evidence a buyer would otherwise fly out to collect.

Vendor verification
Business registration, plant capability and quality certifications are checked before a vendor can list.
Certified inspection
Independent inspectors document equipment condition with photos and measurements before an auction opens.
Standards mapping
Products carry the ASTM, EN, IS or DOT references they were designed against, visible on every listing.
Secure documentation
Quotes, drawings and approvals stay in one thread with an audit trail — with e-signature workflows on the roadmap.
Listing #PX-4820Verified
Product
Box culvert 2400 × 1800
Standard
ASTM C1577 / EN 14844
Load class
HS-25 / LM1
Lead time
18 working days
Plant
Verified · Rotterdam

Attached documents

  • DWGShop drawing
  • PDFLoad calculation
  • PDFMill certificate
  • RFABIM object
Inspected 12 days agoRequest quote →
Live now

Upcoming auctions

Bid on inspected equipment from trusted precasters worldwide. Subscribe to alerts and never miss a lot.

  • Lot 118Twin-shaft mixer 2.5 m³11 bids2d 14h
  • Lot 124Carousel pallet circuit6 bids4d 02h
  • Lot 131Culvert form set 24003 bids6d 19h
Trench mould closed with the lid plate fitted, ready for pouring
New region

Now live in Puerto Rico & the Caribbean

Manufacturers, engineers and buyers across the region can now access precast products, engineering resources, rebate programmes and knowledge tools through a single platform.

  • Regional precast manufacturers & suppliers
  • Engineering support tailored to local requirements
  • Access to knowledge, videos and rebate programmes
  • Designed for infrastructure, industrial and commercial projects
Our mission

Modernising how the precast world connects & trades.

Plants and projects got more complex. The tools to find equipment, coordinate services and discover trusted vendors stayed fragmented. We exist to close that gap.

  • Enable global visibility for manufacturers, fabricators and service providers.
  • Reduce idle inventory and unlock value through smarter exchange and auctions.
  • Support better-engineered projects through access to standards and expertise.
Our vision

To become the global digital hub where precast manufacturers, engineers and buyers discover, evaluate and transact with confidence — supported by verified data, transparent workflows and industry-driven standards.

Transparency

Clear listings, verified vendors and consistent standards to support every transaction.

Innovation

Bringing modern digital tools — discovery, matching, auctions and approvals — into a traditionally offline industry.

Industry-first focus

Designed around how precast plants actually operate: equipment, people, standards and time.

Connected ecosystem

Marketplace, exchange, engineering and auctions — not isolated tools.

Our goal is not just to list equipment — it’s to support the entire lifecycle of precast assets, projects and partnerships.

Our story

Built by listening to the people who actually run the plants.

The industry was using world-class equipment and engineering — but relying on outdated, fragmented channels to find partners, source equipment and move surplus assets.

  1. 01

    Understand real plant challenges

    We spoke with operators, engineers and buyers about day-to-day bottlenecks — sourcing, idle assets, standards and limited visibility across regions.

  2. 02

    Design a unified marketplace

    We aligned listings, auctions, engineering and standards into one structured ecosystem, with clear roles for buyers, vendors and service providers.

  3. 03

    Build for trust & longevity

    We focus on verification, clarity in listings and transparent workflows that support long-term relationships — not one-time transactions.

  4. 04

    Evolve with the industry

    As precast adopts more digital tools, the platform keeps adding capabilities, standards integrations and analytics over time.

“This is just the beginning — a never-ending new era for precasters and concreters.

FAQ

Questions we get every week.

Quick answers about working with the platform. If yours isn't here, send it over and we will answer it by email.

Still not sure?

Share your current challenge — even if it isn’t a fully defined project. We’ll tell you whether the platform or our partners are a good fit.

Talk to us

Precast manufacturers, equipment vendors, fabrication shops, engineering firms and service providers. Every vendor is verified — business registration, plant capability and quality certifications — before listings go live.

Yes. Browsing the marketplace, reading Precastipedia and viewing technical data is free and does not sit behind an email wall. Accounts are only needed to request quotes, bid in auctions or list assets.

An independent inspector documents condition with photographs, measurements and an operating report before an auction lot opens. The report is attached to the listing so every bidder sees the same evidence.

Listings carry the ASTM, EN, IS or DOT references they were designed against. Regional DOT and municipal standards are mapped where the manufacturer supplies documentation.

North America and Europe are the core markets, with the Caribbean, Puerto Rico and Asia now live. Auction support extends beyond normal hours around auction dates.

Yes. Barter listings handle plant-to-plant swaps, the Free & Donated programme covers community and non-profit projects, and tooling loaners cover short-term needs.

Ready to put your planton the global map?

Join 180+ verified vendors already listing products, machinery and engineering services to buyers across 35 countries.

  • Free to browse
  • No email wall on technical data
  • Vendor onboarding in 48h