Watch the system before you specify it.
Real-time design models and video walkthroughs that bring precast engineering to life — systems, connections, loads and on-site assembly, shown rather than described.
Watch the mould before you specify it.
Walkthroughs of the moulds themselves — how each one opens, how the cast unit comes clear, and the end profile that lets sections run together.
4 ft leaching galley — mould walkthrough
The galley mould opening, the cast unit lifting clear, and the interlocking end profile that lets sections run together.
Leaching galley
Built to run in series.
Galley moulds cast a chamber with an open end, so sections key into one another and a run extends to whatever length the drainage field needs.
30–48 catch basin mould
A rectangle-cutout catch basin mould opening on its stand frame, with the cast unit exposed as the side panels swing clear.
3 ft leaching galley mould
The 3 ft galley mould through its release sequence, showing the arch profile and the open end the next section keys into.
Ring mould
A manhole ring mould opening on its cradle, with the stepped joint that seats the next ring above it.
Square block mould
A small square block mould through its full cycle — panels releasing, the cast unit clearing, and the mould closing again.
Real precast, real projects.
Casting lines, cured yards, beam launches and mould details — photographed inside the plants and on the sites where this work actually happens.
