
Manhole riser Ø1200
Sanitary riser section with integral step irons and a rubber-ring joint, cast to ASTM C478 and stocked in four heights.
- Load
- HS-25
- Lead time
- 12 working days
Standards & associations






















































Precast catch basin with knock-out pipe seats on all four faces and a ductile iron grate frame cast in.
Verified listing1 / 5Free to download. No email wall on technical data.
A 600 × 600 mm precast catch basin at 900 mm depth, with Ø300 knock-out pipe seats on all four faces and a ductile iron grate frame cast in.

Knock-outs are opened only where a pipe enters, and Ø300 pipe connects into the seat on that face. Unused faces stay closed.

Finished basins are stored in the yard alongside the pipe and chamber products they are installed with.
Where a 600 × 600 catch basin is set and what connects to it.

Set at the low point of a surface catchment, taking run-off through the cast-in grate at H-20 loading.

Ø300 pipe connects through any of the four knock-out seats, depending on the run direction.

Held with the rings and chambers it is commonly installed alongside.
There is a Ø300 knock-out on each of the four faces. Only the faces a run enters need to be opened.
Yes, the ductile iron frame is cast into the unit. A grate datasheet is supplied with it.
The 300 mm sump collects grit and silt below the outlet invert, keeping it out of the downstream pipe.
600 × 600 mm internally at 900 mm depth, with 100 mm walls.
H-20, to ASTM C913.

Sanitary riser section with integral step irons and a rubber-ring joint, cast to ASTM C478 and stocked in four heights.

Two-compartment monolithic septic tank with cast-in inlet and outlet tees, watertight to ASTM C1227.