Skip to content
become a verified vendor

Coverage

Precast Industries — Everything Precast
Precast/Prestressed Concrete InstituteNational Precast Concrete AssociationAmerican Concrete Pipe AssociationConcrete Masonry & Hardscapes AssociationNortheast Precast Concrete AssociationPacific Northwest Precast Concrete AssociationCalifornia Precast Concrete AssociationTexas Concrete Products AssociationOhio Precast Concrete AssociationPrecast Concrete Association of New YorkNew Jersey Precast Concrete AssociationPennsylvania Precast AssociationPennsylvania Aggregates and Concrete AssociationPrecast Concrete Association of VirginiaPrecast Tank Association of VirginiaWisconsin Precast Concrete AssociationMichigan Concrete AssociationKentucky Concrete AssociationAlabama Concrete Industries AssociationFlorida Concrete & Products AssociationFlorida Prestressed Concrete AssociationPrecast Concrete Structures Association of FloridaCarolinas Concrete Pipe and Products AssociationPCI Georgia/CarolinasPrecast of MaineCAPCA PrecastAPAPrecast/Prestressed Concrete InstituteNational Precast Concrete AssociationAmerican Concrete Pipe AssociationConcrete Masonry & Hardscapes AssociationNortheast Precast Concrete AssociationPacific Northwest Precast Concrete AssociationCalifornia Precast Concrete AssociationTexas Concrete Products AssociationOhio Precast Concrete AssociationPrecast Concrete Association of New YorkNew Jersey Precast Concrete AssociationPennsylvania Precast AssociationPennsylvania Aggregates and Concrete AssociationPrecast Concrete Association of VirginiaPrecast Tank Association of VirginiaWisconsin Precast Concrete AssociationMichigan Concrete AssociationKentucky Concrete AssociationAlabama Concrete Industries AssociationFlorida Concrete & Products AssociationFlorida Prestressed Concrete AssociationPrecast Concrete Structures Association of FloridaCarolinas Concrete Pipe and Products AssociationPCI Georgia/CarolinasPrecast of MaineCAPCA PrecastAPA
Retaining Systems

Jersey barrier F-shape

Free-standing F-shape safety barrier with pin-and-loop connections, crash tested to MASH TL-3.

Standard
AASHTO MASH TL-3
Load class
TL-3
Lead time
7 working days
Price
$385.00
Aerial view of the yard where finished barrier units are stored in rowsVerified listing1 / 4

Specification

Length
3050 mm
Height
810 mm
Base width
610 mm
Weight
1,860 kg
Connection
Pin and loop
Lifting
2 × cast-in anchors

Attached documents

Free to download. No email wall on technical data.

Free-standing, pinned end to end.

An F-shape precast safety barrier at 3050 mm length, crash tested to MASH TL-3 and connected unit to unit with a pin and loop. Free-standing, so no anchorage into the pavement is required.

  • F-shape profile — The F-shape face redirects a vehicle back into its lane, with the lower break point set to limit vehicle climb.
  • Pin and loop connection — Units connect with a pin through cast-in loops, so a run acts together rather than as separate blocks.
  • MASH TL-3 — Crash tested to AASHTO MASH Test Level 3, with the test summary supplied.
  • Free-standing — At 1,860 kg on a 610 mm base, the unit restrains by mass and connection without being anchored down.

Stored by run

Finished units are stored in rows in the yard and loaded in the order they will be set, so the pin connection can be made up as each unit lands.

Supplied from the plant

Produced alongside the plant's other highway products, with a seven working day lead time from order.

In use

Where an F-shape barrier run is placed and how it is handled.

Work zone separation

Set free-standing to separate live traffic from a work zone, pinned unit to unit along the run.

Lifting and setting

Two cast-in anchors take the 1,860 kg unit, so it is set and repositioned without slinging under the base.

Plant supply

Held and produced at the plant for highway and site contractors on short lead times.

FAQs

No. It is free-standing and restrains by mass and by the pin-and-loop connection between units.

AASHTO MASH Test Level 3, with the crash test summary supplied as a document.

A pin through cast-in loops at each end, made up as each unit is set.

By two cast-in lifting anchors. The unit weighs 1,860 kg at 3050 mm long.

810 mm high on a 610 mm base width, in the F-shape profile.