
Interlocking trench mould
Steel trench mould with hydraulic side release and an interlocking male/female end profile, built to any internal section a plant specifies.
- Load
- HS-25 / LM1
- Lead time
- 6–10 weeks
Standards & associations






















































Traffic-rated cable vault with cast-in pulling irons, cable racks and a bolt-down aluminium hatch.
Verified listing1 / 5Free to download. No email wall on technical data.
A 3000 × 2000 mm traffic-rated cable vault at 2100 mm internal height, with cast-in pulling irons, cable racks and a bolt-down aluminium hatch.

Produced in steel frames alongside the plant's panel work, which is what holds the internal dimensions across a batch.

Finished vaults are held in the yard with the hatch fitted, ready to load on a fourteen working day lead time.
Where a 3 × 2 m cable vault is installed and what it carries.

Set below a road or hardstanding at H-20 loading, with the hatch brought up to finished level.

Four 20 kN pulling irons and six rack positions handle pulling the run in and supporting it afterwards.

Cast at the plant in steel frames and stored complete with fittings.
Yes, it is rated H-20 to ASTM C858, with a load rating document supplied.
Four irons at 20 kN each, cast into the structure rather than fixed after stripping.
1200 × 900 mm in aluminium, bolted down.
Six positions, for supporting and separating the cable runs inside the vault.
3000 × 2000 mm on plan at 2100 mm internal height, with 150 mm walls.