
Twin-shaft mixer 2.5 m³
Compulsory twin-shaft mixer with hydraulic discharge gate, moisture probe and a rebuilt gearbox at 6,200 hours.
- Year
- 2019
- Usage
- 11,400 h
Standards & associations






















































Servo-controlled compression machine with cube and cylinder platens, calibrated to EN 12390-4 in 2026.
Verified listing1 / 3
A servo-controlled compression machine at 3000 kN capacity with cube and cylinder platens, calibrated to EN 12390-4 in 2026. Low use, from 2023.

Closed-loop servo control keeps the rate within the standard's limits. A rate that drifts changes the result, not just the record of it.

Output over USB and network, so results attach to a batch record rather than being copied off a display by hand.
Where a 3000 kN compression machine sits in a plant's quality work.

Testing cubes and cylinders sampled from production pours against the specified strength.

Results support releasing finished units, and are filed with the batch they came from.

Networked output feeds the plant's own record keeping without manual transcription.
In 2026, to EN 12390-4. The calibration date is the figure to check before it is put into service.
Both — 150 mm cube and 160 mm cylinder platens are supplied.
Over USB and network output, so they can be written straight to a batch record.
It is listed as low use from 2023, in new condition.
It holds the loading rate within the limits the test standard sets, which affects the measured strength and not only the record.

Compulsory twin-shaft mixer with hydraulic discharge gate, moisture probe and a rebuilt gearbox at 6,200 hours.

Complete pallet circulation circuit — 42 pallets, shuttle, tilting table and curing rack — cleared from a plant product change.

Hydraulic core-puller form for 2400 × 1800 box culverts, with quick-release side panels and integral vibration.